Operating Conditions

Pump liquid: Clean Water

Liquid temperature: 2-95℃

Ambient temperature: 0-40℃

Max. system pressure: 1.0MPa

Features

CFA pump is a complete range of circulator pump feature

Pump parameters adjust to the actual system environments

Automatic night-time duty

The frequency converter

Display the actual power consumption in watt

Motor based on compact-rotor technology

The energy label A indicates the energy-saving level of the pump. The energy

classification system has seven levels, i.e. from A to G. Level A is the best.

The installation of a CFA pump will reduce the power consumption considerably,

reduce noise from thermostatic valves and similar fittings, and improve the

control of the system.

CFA pump offers a host of advantages:

Energy savings automatic control of the differential pressure.

Low-noise operation.

Safety built-in electrical and thermal protection of the pump.

Top quality materials used.

CFA pump is especially suitable for

Installation in existing systems where the differential pressure of the pump is too high during periods of

reduced flow demand.

Installation in new systems for fully automatic adjustment of the performance to flow demands without the use of by pass valve or similar expensive components.

The pump can be used for clean, thin, non-aggressive and non-explosive liquid, not containing solid particles, fibers or mineral oil.

The pump must not be used for the transfer of flammable liquids such as diesel, petrol and similar liquid.

Motor

Power supply : 1×230V~/50Hz

Type: Permanent magnet motor

Insulation class: F

Enclosure class: IP44

Coil: Copper wire

Material

Pump body: Cast iron or stainless steel

Impeller: PES

Bearing: Ceramic

Shaft: Ceramic

Applications

CFA pump is designed for circulating liquids in heating systems.

Automatic operation proportional or constant pressure control.

Automatic night-time duty