Operating Limits:

Max. suction head: 8m

Max. liquid temperature: 60℃

Max. ambient temperature: 40℃

Continuous duty

Motor:

Two-Pole induction motor(n=2900 r.p.m.)

Insulation Class B-Protection IPX4

Material:

Pump Body:Cast Aluminum

Impeller:Cast Aluminum

Motor Shaft:Hi-Cr plated 45# Steel

Mechanical Seal:Ceramic / Graphite

Installation and Use:

Centrifugal single impeller low head water pumps for flow

irrigation systems.

The pump major function is to boost and maintain pressure

in domestic water supply systems. The water source can be

a well or a water tank. Pressure boost in municipal water

supply systems is allowed on condition the total summing

pressure in the system does not exceed 4 Bar.

Suitable to pump clean water or non-aggressive liquids charged

with small solid impurities. Sand content is allowed up to 40 mg/

m3. Higher concentration of solid impurities lead to shortening of

pump life.

To be used in flow irrigation systems in gardening and agriculture.